Vegetable-tanned leather is a living material that responds over time to the wearer’s touch and environment, gradually developing a unique depth and natural aging (patina).
Due to these characteristics, excessive or unnecessary care can interfere with the leather's natural texture and aging process. Vegetable-tanned leather matures beautifully through everyday use, embracing the marks of time as part of its story.
Only when the leather feels dry or dull should you apply a thin layer of product using a care item suitable for its specific properties. In all other cases, minimal intervention is the best form of care.
If you feel care is necessary, please follow the instructions below.
< How to Remove Makeup, Stains, or Surface Contamination >
Using Liquid Cleaner (Carat Cleaner)
Do not spray the Carat Cleaner directly onto the leather. Instead, apply a small amount (about half the size of a fingernail) onto a sponge or soft cloth, then gently wipe the surface in a thin, even layer.
Excessive use of the cleaner may leave white marks if the leather cannot fully absorb the product. Noir Larmes uses vegetable-tanned leather that is relatively resistant to moisture, so you may also wipe it using a cloth lightly dampened with lukewarm water (microfiber or 100% cotton recommended).
Cleaning with Lukewarm Water (Approx. 30–35°C / 86–95°F)
Prepare lukewarm water that feels gently warm to the touch. Avoid cold or hot water. Do not spray or pour water directly onto the leather.
Prepare two microfiber or 100% cotton cloths. Dampen one cloth with lukewarm water, then wring it out thoroughly until it's nearly dry.
Spot Clean Gently Tap or lightly wipe the stained area. Do not rub forcefully, as friction can damage the leather.
Blot Excess Moisture Use the dry cloth to gently press and absorb any remaining moisture.
Air Dry Naturally Avoid direct sunlight or heat. Dry the item in a shaded, well-ventilated space.
※ Please Note ※
ㆍ Wet wipes often contain preservatives, fragrances, surfactants, alcohol, and purified water, which can cause discoloration or staining.
ㆍ When using a spray bottle, failure to wipe the leather immediately can result in water spots.
ㆍ Do not wet the entire surface; clean only targeted areas.
ㆍ Repeatedly cleaning the same area may dry out the leather. Please refer to the care guide to prevent over-treatment.
ㆍ Distressed, two-tone brown, and oil-brushed leathers are particularly sensitive and require extra caution.
Storage Instructions
Remove the provided poly bag and suit case before storing. Store the item either uncovered or wrapped in 100% cotton fabric.
When hanging, avoid contact with other garments and prolonged exposure to sunlight. Store in a cool, dry, well-ventilated area away from moisture and direct light to prevent discoloration or damage.
Leather Cleaning Instructions
Frequent dry cleaning can damage leather. Regular dry cleaning is not recommended.
If cleaning is necessary, please entrust the item to a professional leather cleaning service.
To maintain the natural texture and condition of shearling products over time, regular care is recommended.
When the surface feels dry or appears dull, please follow the steps below for proper maintenance.
If your shearling jacket becomes dry or stained, gently wipe the surface with a sponge using an appropriate amount of Carat Cream-Type Essence. This will help restore its appearance effectively.
Care Instructions
1. Dust Removal
Use a soft brush to gently remove dust and debris from the surface.
2. Application of Care Essence
Apply a suitable amount of Carat Premium Cream Essence to a sponge, then evenly spread it over the leather surface—excluding areas made from vegetable-tanned lambskin such as piping, side adjusters, or neck belts.
3. Polishing (Optional)
Use a wool glove or wool brush to gently rub the entire surface. This step helps restore a soft luster and smooth out the grain.
4. Shearling Fur Grooming (Optional)
If you wish to tidy the shearling fur, lightly comb it with a wool-specific brush.
Note: Avoid frequent brushing, as it may damage the fibers over time.
Storage Instructions
Remove the poly bag and suit case provided with the product. Store the jacket either uncovered or wrapped in 100% cotton fabric.
If hanging the item, avoid contact with other garments and prolonged exposure to direct sunlight.
We recommend storing it in a cool, well-ventilated area away from humidity and light to prevent discoloration.
Cleaning Instructions
Shearling, mouton, and other leather garments with fur should not be machine washed or taken to a standard dry cleaner.
We recommend manual cleaning by a professional leather cleaning specialist.
During cleaning, avoid solvents and mechanical processes. Instead, a gentle hand-cleaning method that considers the unique characteristics of both the leather and the fur should be used.
This helps prevent discoloration and maintains the integrity of the texture.
Some professional cleaners may use specialized solvents, but in such cases, advanced post-treatment techniques such as re-oiling and softening are essential.
These processes are not typically available at regular dry cleaners, so please take caution.
After cleaning, never use a dryer or expose the item to direct sunlight. Always allow it to air dry naturally in a shaded, well-ventilated area.
A. Genuine suede is not made from the grain (outer) side of the leather, but from the split (inner) layer, which is brushed to create a soft, velvety texture. During this brushing process, suede dust naturally occurs and is considered an inherent characteristic of genuine suede leather. Unlike PU or synthetic suede, all natural suede products—regardless of brand—can produce some dust.
Especially during the initial wears, you may notice more dust. Over time, this will gradually subside. If you wish to minimize this early on, we recommend using a low-adhesion lint roller to gently remove surface and interior dust.
※ Please avoid using high-adhesion tape rollers, as they can damage the suede surface.
Q. After wearing a suede product, lint or pilling appeared on my top or bottoms.
A. Suede itself does not pill, as it is not a fiber-based fabric. What may appear to be pilling is usually due to friction between the suede surface and garments made of materials like wool or polyester blends, which are more prone to pilling. In many cases, the lint or pills were already present on the clothing and became more noticeable when they caught onto the fine suede dust.
How to remove stains from suede
Suede is a delicate material, and improper cleaning methods or incorrect water ratios when using suede shampoo/cleaner may cause color transfer or spreading of the stain. To prevent damage and ensure safe care, please follow the steps below:
1. Dust removal with a suede brush Use a dedicated suede brush to gently remove surface dust or light dirt. Suede brushes are often firm, so apply light pressure and brush in the direction of the nap to avoid damaging the surface.
2. Spot cleaning with a suede eraser For minor stains or localized spots, use a suede eraser to gently rub the area. Do not apply excessive pressure, and avoid repeated rubbing, as this may damage the leather surface.
3. Finishing with a crepe brush Use a soft crepe brush to tidy up remaining dust and restore the natural nap. This step helps revive the texture and appearance of the suede.
※ Please Note ※
ㆍ Wet wipes often contain preservatives, fragrances, surfactants, alcohol, and purified water, which may cause discoloration or staining when used on suede.
ㆍ Suede nap is very delicate. Strong friction or rough handling may cause irreversible damage.
ㆍ If stains persist after home care, we strongly recommend visiting a professional cleaner that specializes in suede or leather.
ㆍ This guide is for general surface stains and dirt only; it may not be effective for oil buildup from skin contact (e.g., neck collar area).
ㆍ Due to the nature of suede, light wear, discoloration, and subtle stains may develop over time. This is a natural part of the material's aging process and adds depth and character to the product.
Storage Guide
Please remove the plastic poly bag and suit case provided, and store the item uncovered or wrapped in 100% cotton fabric. If storing on a hanger, avoid friction with other garments, and keep the product away from direct sunlight or humid environments. We recommend a cool, well-ventilated space for long-term storage.
Cleaning Instructions
When cleaning suede products, it is important to avoid solvents or machine washing. Instead, they should be delicately handled using a manual cleaning process with special agents that prevent color fading.
Conventional dry cleaning with machines at standard cleaners may cause fiber damage, shrinkage, or discoloration. Therefore, we recommend entrusting the entire process to a professional leather cleaning service that performs manual care throughout.
All genuine leather products have an inherent possibility of dye transfer due to the nature of the material. This phenomenon can also be observed in general leather goods (e.g., leather shoes, leather bags, leather garments), where dye may partially transfer when rubbed with tissue, cotton, or fabric.
Please note that patent leather with enamel coating is an exception to this.
At our company, leather is ordered in large quantities from the tannery and processed using the same environment and techniques, so it is structurally unlikely for only a specific product to have a dye transfer defect.
The likelihood of dye transfer may vary depending on the wearing environment. In particular, conditions such as rainy weather, high temperatures, excessive sweating, or high humidity can increase the chance of dye transfer.
As leather inherently carries the risk of dye transfer, we kindly advise extra caution when wearing it with light-colored clothing.
Not all natural lambskin leather have the same quality. Leather is either chrome or tannin typed. Noir Larmes use tannin leather which is thick and durable. It is resistant to scratches and moisture, so it is easy to maintain. In case of any stains or small marks, you can simply clean with a damp cloth.
Frequent dry cleaning can cause damage to leather products and is not recommended as a regular practice.
If cleaning is necessary, always entrust your item to a professional leather cleaning service.
How to Clean Suede
When cleaning suede products, it is important to avoid solvents or machine washing. Instead, they should be delicately handled using a manual cleaning process with special agents that prevent color fading.
Conventional dry cleaning with machines at standard cleaners may cause fiber damage, shrinkage, or discoloration. Therefore, we recommend entrusting the entire process to a professional leather cleaning service that performs manual care throughout.
How to Clean Shearling (Mouton)
For leather garments that include shearling or fur—such as mouton jackets—we recommend manual cleaning by a professional leather care service, rather than machine washing or standard dry cleaning.
Cleaning must be done using gentle, low-impact techniques tailored to the characteristics of both leather and fur, avoiding solvents or mechanical processes. This helps prevent discoloration and texture damage.
Some specialized cleaners may use specific solvents, but this requires advanced post-treatment such as re-oiling and softening processes, which typical dry cleaners are not equipped to perform.
After cleaning, never use a dryer or expose the item to direct sunlight. Always allow it to air dry naturally in a well-ventilated, shaded area.
Q. Do you slaughter animals for leather or clothing?
A. No, that is not the case.
All tanneries that work with Noir Larmes do not slaughter animals for the purpose of clothing production. Only hides sourced from animals that have been properly processed under strict environmental regulations within the food industry are used.
The vegetable-tanned leather used by Noir Larmes is uncoated, allowing it to absorb water and oil quickly while maintaining breathability throughout. Thanks to these characteristics, it dries naturally even after light rain exposure without significantly affecting its flexibility or breathability.
However, if moisture remains on the surface for an extended period, watermarks may form. We recommend gently wiping the surface with a soft cloth as soon as possible.
Rainwater may contain microscopic impurities, so please avoid exposing the jacket to rain whenever possible.
If the jacket gets wet, gently remove excess moisture with a soft cloth and allow it to air dry in a well-ventilated, shaded area away from direct sunlight.
※ Please Note ※
Leaving moisture on the surface for too long may cause water stains.
If the jacket is thoroughly soaked, we recommend taking it to a professional leather cleaner.
Do not use artificial heat sources such as dryers, heaters, or hairdryers.
Always avoid rain exposure to prevent contamination from rainwater impurities.
Suede Jackets
Suede is a delicate material with minimal surface treatment, making it highly sensitive to water exposure. When wet, its fine texture may become flattened or stained, and rainwater impurities can cause discoloration or marks. Immediate and careful handling is essential.
Do not rub the surface when wet. Instead, blot gently using a soft, absorbent cloth.
Lay the jacket flat and let it air dry naturally in a shaded, well-ventilated area, avoiding direct sunlight.
Once completely dry, use a soft crepe or suede brush to gently restore the nap and texture.
※ Please Note ※
Never use artificial heat sources such as dryers, heaters, or hairdryers. These can cause shrinkage or hardening.
If heavy staining or discoloration occurs, we recommend consulting a professional leather cleaner.
To prevent damage, avoid wearing suede in the rain.
Shearling Jackets
Noir Larmes shearling features a micro semi-crack finish, offering enhanced surface durability and moisture resistance compared to typical shearling. Light rain does not easily damage it, but due to the material's absorbency, prolonged moisture can cause staining or texture changes. Follow the instructions below for proper care:
Blot the surface gently with a soft, absorbent cloth to remove moisture.
Lay the product flat and allow it to air dry naturally in a shaded, well-ventilated space without applying heat.
Once the surface is completely dry and feels slightly dehydrated, apply a small amount of Carat Premium Essence for added moisture. (Refer to the Shearling Care Guide FAQ for usage.)
※ Please Note ※
Due to the material's structure, moisture can linger inside shearling. Only apply care products after confirming it is completely dry.
If the wool becomes matted or flattened, gently brush it out by hand or use a wool brush after drying.
If the product is heavily soaked, professional leather cleaning is strongly recommended.
Q. There is a peeling or chipping issue on the leather product.
A. Unlike chrome-tanned leather, tannin (vegetable)-tanned leather is not finished with pigments or coatings that cover natural scars or scratches formed while the animal was alive. Instead, it is processed with an aniline finish, which preserves the leather's natural texture and character.
Chrome-tanned leather is typically treated with pigments during the tanning process to cover imperfections and achieve a uniform look. In contrast, vegetable-tanned leather uses only plant-based dyes, resulting in a naked leather that retains the grain and surface as-is, without artificial finishing.
Only top-grade hides are suitable for vegetable tanning, and hides appropriate for Alto-type tannin leather are particularly rare and expensive. Still, due to the nature of naked leather, even the finest hides will inevitably have natural marks on the surface.
This is an intrinsic characteristic of natural leather. Over time, each piece will develop a unique aging and patina based on the wearer’s lifestyle, enhancing its depth and beauty. Since artificial processing is minimized, minor flaws, light scratches, wrinkles, or vein marks may be visible from the outset—these are not defects but natural traits that highlight the individuality of each product.
Tannin leather also reacts to external elements like friction, sunlight, moisture, and the user’s habits. As time passes, the tone and texture deepen and soften. Initial scratches or unevenness often blend into the surrounding surface and become part of the leather’s unique charm.
Alto-type leather is highly durable and maintains its structure well, even with long-term wear. However, the production process is challenging. Areas with overlapping layers—such as the collar, shoulders, sleeves, cuffs, or seam allowances—are thicker, making it difficult for sewing machines to pass through smoothly. As a result, friction during stitching may cause minor chipping or scuffing.
Using thinner leather could make the manufacturing process easier, but it would significantly reduce durability and increase the risk of the surface deteriorating into a plastic-like texture over time. Therefore, Noir Larmes deliberately selects dense, high-quality leather to ensure structural integrity.
Since each piece is crafted by hand, the degree of chipping may vary slightly from one item to another. We kindly ask for your understanding that producing a leather product with absolutely no chipping is virtually impossible.
Vegetable-tanned leather is a living material that responds over time to the wearer’s touch and environment, gradually developing a unique depth and natural aging (patina).
Due to these characteristics, excessive or unnecessary care can interfere with the leather's natural texture and aging process.
Vegetable-tanned leather matures beautifully through everyday use, embracing the marks of time as part of its story.
Only when the leather feels dry or dull should you apply a thin layer of product using a care item suitable for its specific properties.
In all other cases, minimal intervention is the best form of care.
If you feel care is necessary, please follow the instructions below.
< How to Remove Makeup, Stains, or Surface Contamination >
Do not spray the Carat Cleaner directly onto the leather. Instead, apply a small amount (about half the size of a fingernail) onto a sponge or soft cloth, then gently wipe the surface in a thin, even layer.
Excessive use of the cleaner may leave white marks if the leather cannot fully absorb the product.
Noir Larmes uses vegetable-tanned leather that is relatively resistant to moisture, so you may also wipe it using a cloth lightly dampened with lukewarm water (microfiber or 100% cotton recommended).
Prepare lukewarm water that feels gently warm to the touch.
Avoid cold or hot water. Do not spray or pour water directly onto the leather.
Prepare two microfiber or 100% cotton cloths.
Dampen one cloth with lukewarm water, then wring it out thoroughly until it's nearly dry.
Spot Clean Gently
Tap or lightly wipe the stained area.
Do not rub forcefully, as friction can damage the leather.
Blot Excess Moisture
Use the dry cloth to gently press and absorb any remaining moisture.
Air Dry Naturally
Avoid direct sunlight or heat. Dry the item in a shaded, well-ventilated space.
※ Please Note ※
ㆍ Wet wipes often contain preservatives, fragrances, surfactants, alcohol, and purified water, which can cause discoloration or staining.
ㆍ When using a spray bottle, failure to wipe the leather immediately can result in water spots.
ㆍ Do not wet the entire surface; clean only targeted areas.
ㆍ Repeatedly cleaning the same area may dry out the leather. Please refer to the care guide to prevent over-treatment.
ㆍ Distressed, two-tone brown, and oil-brushed leathers are particularly sensitive and require extra caution.
Remove the provided poly bag and suit case before storing.
Store the item either uncovered or wrapped in 100% cotton fabric.
When hanging, avoid contact with other garments and prolonged exposure to sunlight.
Store in a cool, dry, well-ventilated area away from moisture and direct light to prevent discoloration or damage.
Frequent dry cleaning can damage leather.
Regular dry cleaning is not recommended.
If cleaning is necessary, please entrust the item to a professional leather cleaning service.
To maintain the natural texture and condition of shearling products over time, regular care is recommended.
When the surface feels dry or appears dull, please follow the steps below for proper maintenance.
If your shearling jacket becomes dry or stained, gently wipe the surface with a sponge using an appropriate amount of Carat Cream-Type Essence. This will help restore its appearance effectively.
1. Dust Removal
Use a soft brush to gently remove dust and debris from the surface.
2. Application of Care Essence
Apply a suitable amount of Carat Premium Cream Essence to a sponge, then evenly spread it over the leather surface—excluding areas made from vegetable-tanned lambskin such as piping, side adjusters, or neck belts.
3. Polishing (Optional)
Use a wool glove or wool brush to gently rub the entire surface. This step helps restore a soft luster and smooth out the grain.
4. Shearling Fur Grooming (Optional)
If you wish to tidy the shearling fur, lightly comb it with a wool-specific brush.
Note: Avoid frequent brushing, as it may damage the fibers over time.
Remove the poly bag and suit case provided with the product. Store the jacket either uncovered or wrapped in 100% cotton fabric.
If hanging the item, avoid contact with other garments and prolonged exposure to direct sunlight.
We recommend storing it in a cool, well-ventilated area away from humidity and light to prevent discoloration.
Shearling, mouton, and other leather garments with fur should not be machine washed or taken to a standard dry cleaner.
We recommend manual cleaning by a professional leather cleaning specialist.
During cleaning, avoid solvents and mechanical processes. Instead, a gentle hand-cleaning method that considers the unique characteristics of both the leather and the fur should be used.
This helps prevent discoloration and maintains the integrity of the texture.
Some professional cleaners may use specialized solvents, but in such cases, advanced post-treatment techniques such as re-oiling and softening are essential.
These processes are not typically available at regular dry cleaners, so please take caution.
After cleaning, never use a dryer or expose the item to direct sunlight. Always allow it to air dry naturally in a shaded, well-ventilated area.
Q. Suede dust is coming off the product.
A. Genuine suede is not made from the grain (outer) side of the leather, but from the split (inner) layer, which is brushed to create a soft, velvety texture.
During this brushing process, suede dust naturally occurs and is considered an inherent characteristic of genuine suede leather. Unlike PU or synthetic suede, all natural suede products—regardless of brand—can produce some dust.
Especially during the initial wears, you may notice more dust. Over time, this will gradually subside.
If you wish to minimize this early on, we recommend using a low-adhesion lint roller to gently remove surface and interior dust.
※ Please avoid using high-adhesion tape rollers, as they can damage the suede surface.
Q. After wearing a suede product, lint or pilling appeared on my top or bottoms.
A. Suede itself does not pill, as it is not a fiber-based fabric.
What may appear to be pilling is usually due to friction between the suede surface and garments made of materials like wool or polyester blends, which are more prone to pilling.
In many cases, the lint or pills were already present on the clothing and became more noticeable when they caught onto the fine suede dust.
Suede is a delicate material, and improper cleaning methods or incorrect water ratios when using suede shampoo/cleaner may cause color transfer or spreading of the stain.
To prevent damage and ensure safe care, please follow the steps below:
1. Dust removal with a suede brush
Use a dedicated suede brush to gently remove surface dust or light dirt.
Suede brushes are often firm, so apply light pressure and brush in the direction of the nap to avoid damaging the surface.
2. Spot cleaning with a suede eraser
For minor stains or localized spots, use a suede eraser to gently rub the area.
Do not apply excessive pressure, and avoid repeated rubbing, as this may damage the leather surface.
3. Finishing with a crepe brush
Use a soft crepe brush to tidy up remaining dust and restore the natural nap.
This step helps revive the texture and appearance of the suede.
※ Please Note ※
ㆍ Wet wipes often contain preservatives, fragrances, surfactants, alcohol, and purified water, which may cause discoloration or staining when used on suede.
ㆍ Suede nap is very delicate. Strong friction or rough handling may cause irreversible damage.
ㆍ If stains persist after home care, we strongly recommend visiting a professional cleaner that specializes in suede or leather.
ㆍ This guide is for general surface stains and dirt only; it may not be effective for oil buildup from skin contact (e.g., neck collar area).
ㆍ Due to the nature of suede, light wear, discoloration, and subtle stains may develop over time. This is a natural part of the material's aging process and adds depth and character to the product.
Please remove the plastic poly bag and suit case provided, and store the item uncovered or wrapped in 100% cotton fabric.
If storing on a hanger, avoid friction with other garments, and keep the product away from direct sunlight or humid environments.
We recommend a cool, well-ventilated space for long-term storage.
When cleaning suede products, it is important to avoid solvents or machine washing. Instead, they should be delicately handled using a manual cleaning process with special agents that prevent color fading.
Conventional dry cleaning with machines at standard cleaners may cause fiber damage, shrinkage, or discoloration. Therefore, we recommend entrusting the entire process to a professional leather cleaning service that performs manual care throughout.
All genuine leather products have an inherent possibility of dye transfer due to the nature of the material. This phenomenon can also be observed in general leather goods (e.g., leather shoes, leather bags, leather garments), where dye may partially transfer when rubbed with tissue, cotton, or fabric.
Please note that patent leather with enamel coating is an exception to this.
At our company, leather is ordered in large quantities from the tannery and processed using the same environment and techniques, so it is structurally unlikely for only a specific product to have a dye transfer defect.
The likelihood of dye transfer may vary depending on the wearing environment. In particular, conditions such as rainy weather, high temperatures, excessive sweating, or high humidity can increase the chance of dye transfer.
As leather inherently carries the risk of dye transfer, we kindly advise extra caution when wearing it with light-colored clothing.
Q. Is it hard to maintain lambskin leather?
A. Not necessarily.
Not all natural lambskin leather have the same quality. Leather is either chrome or tannin typed. Noir Larmes use tannin leather which is thick and durable. It is resistant to scratches and moisture, so it is easy to maintain. In case of any stains or small marks, you can simply clean with a damp cloth.
Frequent dry cleaning can cause damage to leather products and is not recommended as a regular practice.
If cleaning is necessary, always entrust your item to a professional leather cleaning service.
When cleaning suede products, it is important to avoid solvents or machine washing. Instead, they should be delicately handled using a manual cleaning process with special agents that prevent color fading.
Conventional dry cleaning with machines at standard cleaners may cause fiber damage, shrinkage, or discoloration. Therefore, we recommend entrusting the entire process to a professional leather cleaning service that performs manual care throughout.
For leather garments that include shearling or fur—such as mouton jackets—we recommend manual cleaning by a professional leather care service, rather than machine washing or standard dry cleaning.
Cleaning must be done using gentle, low-impact techniques tailored to the characteristics of both leather and fur, avoiding solvents or mechanical processes. This helps prevent discoloration and texture damage.
Some specialized cleaners may use specific solvents, but this requires advanced post-treatment such as re-oiling and softening processes, which typical dry cleaners are not equipped to perform.
After cleaning, never use a dryer or expose the item to direct sunlight. Always allow it to air dry naturally in a well-ventilated, shaded area.
Q. Do you slaughter animals for leather or clothing?
A. No, that is not the case.
All tanneries that work with Noir Larmes do not slaughter animals for the purpose of clothing production.
Only hides sourced from animals that have been properly processed under strict environmental regulations within the food industry are used.
Q. My leather product got wet in the rain.
The vegetable-tanned leather used by Noir Larmes is uncoated, allowing it to absorb water and oil quickly while maintaining breathability throughout. Thanks to these characteristics, it dries naturally even after light rain exposure without significantly affecting its flexibility or breathability.
However, if moisture remains on the surface for an extended period, watermarks may form. We recommend gently wiping the surface with a soft cloth as soon as possible.
Rainwater may contain microscopic impurities, so please avoid exposing the jacket to rain whenever possible.
If the jacket gets wet, gently remove excess moisture with a soft cloth and allow it to air dry in a well-ventilated, shaded area away from direct sunlight.
※ Please Note ※
Leaving moisture on the surface for too long may cause water stains.
If the jacket is thoroughly soaked, we recommend taking it to a professional leather cleaner.
Do not use artificial heat sources such as dryers, heaters, or hairdryers.
Always avoid rain exposure to prevent contamination from rainwater impurities.
Suede is a delicate material with minimal surface treatment, making it highly sensitive to water exposure. When wet, its fine texture may become flattened or stained, and rainwater impurities can cause discoloration or marks. Immediate and careful handling is essential.
Do not rub the surface when wet. Instead, blot gently using a soft, absorbent cloth.
Lay the jacket flat and let it air dry naturally in a shaded, well-ventilated area, avoiding direct sunlight.
Once completely dry, use a soft crepe or suede brush to gently restore the nap and texture.
※ Please Note ※
Never use artificial heat sources such as dryers, heaters, or hairdryers. These can cause shrinkage or hardening.
If heavy staining or discoloration occurs, we recommend consulting a professional leather cleaner.
To prevent damage, avoid wearing suede in the rain.
Noir Larmes shearling features a micro semi-crack finish, offering enhanced surface durability and moisture resistance compared to typical shearling. Light rain does not easily damage it, but due to the material's absorbency, prolonged moisture can cause staining or texture changes. Follow the instructions below for proper care:
Blot the surface gently with a soft, absorbent cloth to remove moisture.
Lay the product flat and allow it to air dry naturally in a shaded, well-ventilated space without applying heat.
Once the surface is completely dry and feels slightly dehydrated, apply a small amount of Carat Premium Essence for added moisture. (Refer to the Shearling Care Guide FAQ for usage.)
※ Please Note ※
Due to the material's structure, moisture can linger inside shearling. Only apply care products after confirming it is completely dry.
If the wool becomes matted or flattened, gently brush it out by hand or use a wool brush after drying.
If the product is heavily soaked, professional leather cleaning is strongly recommended.
Q. There is a peeling or chipping issue on the leather product.
A. Unlike chrome-tanned leather, tannin (vegetable)-tanned leather is not finished with pigments or coatings that cover natural scars or scratches formed while the animal was alive. Instead, it is processed with an aniline finish, which preserves the leather's natural texture and character.
Chrome-tanned leather is typically treated with pigments during the tanning process to cover imperfections and achieve a uniform look. In contrast, vegetable-tanned leather uses only plant-based dyes, resulting in a naked leather that retains the grain and surface as-is, without artificial finishing.
Only top-grade hides are suitable for vegetable tanning, and hides appropriate for Alto-type tannin leather are particularly rare and expensive. Still, due to the nature of naked leather, even the finest hides will inevitably have natural marks on the surface.
This is an intrinsic characteristic of natural leather. Over time, each piece will develop a unique aging and patina based on the wearer’s lifestyle, enhancing its depth and beauty. Since artificial processing is minimized, minor flaws, light scratches, wrinkles, or vein marks may be visible from the outset—these are not defects but natural traits that highlight the individuality of each product.
Tannin leather also reacts to external elements like friction, sunlight, moisture, and the user’s habits. As time passes, the tone and texture deepen and soften. Initial scratches or unevenness often blend into the surrounding surface and become part of the leather’s unique charm.
Alto-type leather is highly durable and maintains its structure well, even with long-term wear. However, the production process is challenging. Areas with overlapping layers—such as the collar, shoulders, sleeves, cuffs, or seam allowances—are thicker, making it difficult for sewing machines to pass through smoothly. As a result, friction during stitching may cause minor chipping or scuffing.
Using thinner leather could make the manufacturing process easier, but it would significantly reduce durability and increase the risk of the surface deteriorating into a plastic-like texture over time. Therefore, Noir Larmes deliberately selects dense, high-quality leather to ensure structural integrity.
Since each piece is crafted by hand, the degree of chipping may vary slightly from one item to another. We kindly ask for your understanding that producing a leather product with absolutely no chipping is virtually impossible.